22 Aug 2014
68° Mostly Cloudy
Patch Instagram photo by legallyblonde27
Patch Instagram photo by legallyblonde27
Patch Instagram photo by ermyceap
Patch Instagram photo by taratesimu
Patch Instagram photo by taratesimu
Patch Instagram photo by lilyava299
Patch Instagram photo by _mollfairhurst
Patch Instagram photo by thecontemporaryhannah
Patch Instagram photo by lucyketch

Don't Let a Frozen Pipe Burst Your Bubble - Tips for Keeping Your Home Dry

Don't Let a Frozen Pipe Burst Your Bubble - Tips for Keeping Your Home Dry
 With the temperature hovering below freezing, we have more to worry about than finding matching gloves and a scarf. Our pipes may be feeling the frost as well, and often times burst before we figure it out. A burst pipe often times causes significant flooding in your home, which can lead to major problems, including dangerous mold.

Robert Weitz, a Certified Microbial Investigator and founder of Stamford-based RTK Environmental Group, has these tips. “Pipes freeze for three main reasons – quick drops in temperature, poor insulation, and thermostats set at too low a temperature,” said Weitz. So what can you do to protect yourself from your pipes freezing?

-  Insulate pipes in your home’s crawl spaces and attic, since exposed pipes are most susceptible to freezing;

-  Seal spaces and openings that allow cold air inside near where pipes are located;

-  A trickle of water can prevent your pipes from freezing. Open your faucet and let it drip;

-  Don’t change the thermostat dramatically at night. Dropping it a degree or two is fine, but sudden drops in temperature can cause your pipes to freeze;

-  Open cabinet doors to allow heat to get to un-insulated pipes under sinks and appliances near exterior walls;

-  Disconnect garden hoses, turn off the water supply valve inside, and keep the faucets open outside.

"If you open a faucet and no water comes out, don’t take any chances – call in a plumber to see what the story is," Weitz advises. If a water pipe bursts, turn off the water at the main shut-off valve and leave the faucet open. Try to dry out the area as quickly as possible.

"Damp and wet areas are prime locations for mold growth, which can blossom within 24 hours," he warns. Once the repairs are complete, have an independent certified microbial inspector come in to test the area and make sure there is no lingering mold.

For more tips and information on home repairs, renovations, mold, flooding, and more, click here.  For additional information on freezing and bursting pipes, you can visit the Red Cross website.

Share This Article