Deal With Common Bathroom Plumbing Problems

Bathroom plumbing issues can range right from minor problems like faucet draining slowly to big issues like busted water pipes causing your house to become flooded. If left unnoticed, then the minor issues can quickly turn into major ones. While you may handle a few of the bathroom plumbing problems yourself, you may need professional plumbing help in most of the cases.

Low Water Pressure

When showers and sinks are considered, low water pressure is a common issue. Before trying to repair this problem, you must check if water pressure is low still when you turn from cold water into hot water. If it is the case, then it means there is some kind of minerals deposit in the faucet aerator or faucet cartridge that’s blocking the flow of water.

If you’ve a removable aerator, then the solution is simple. All you need to do is simply take it out quickly and put it in some vinegar overnight. But, if the aerator does not detach or you do not have one with you, what you may do is soak shower head or faucet in vinegar. If this also does not solve the problem for you, you should contact a professional plumber that can pull your cartridge and check out the water pressure at water meter. If you’ve older, galvanized water line, you might have oxidation and rust build up in those lines. This scale and rust chokes off flow of water and all lines may have to be replaced.

Clogged Toilet
Another rather most common bathroom plumbing problem is a blocked toilet. In a few cases, a blocked toilet can cause real mess inside your home. It might also flood the apartment below if you reside in any apartment building. The most common tools that you can utilize to clear a blocked toilet are a closet auger and a plunger.
You should begin by utilizing the plunger. Most frequently than not, air pressure will completely take care of clog. But, in more harsh cases, you’ll need to interfere with closet auger. The closet auger is flexible steel coil with handle on one end so that you can easily turn auger head. They are available in two sizes that is 3 feet and 6 feet. You can utilize it to remove clogs which a plunger cannot reach.

Lastly, if either of above do not work your clog is most probably not local means it is not in toilet or in waste arm servicing toilet. When this occur, an auger does not reach far enough in the waste lines to dislodge the clog so the toilet must be removed and sewer rods should be utilized to clear the lines.

Dripping Bathroom Faucet
A bathroom faucet can. begin dripping suddenly. This does not only rise your water bills, but it also can be very unfriendly to hear. One among the most popular causes of dripping or leaking faucets is worn-out seat or washer. The washer is a rubber material which generally forms a seal whenever you turn the faucet off in order to avoid water from coming from it. Over the years, all rubber washers can wear out with their exposure to water. Moreover, if the faucet is utilized quite less, then the washers are prone to drying, leaking and cracking.

To check if it’s the real case in your own bathroom, you need to unscrew faucet handles remove cartridge and look out for any sign of damages. Most of the times, cartridges may be removed with quite ease but in a few cases, scale could make them nearly improbable to remove without special tool.