Custom Shower Doors Come to San Rafael Guest Baths Ahead of the Holidays

Custom Shower Doors in San Rafael, Built to the Opening You Have

Somewhere between the first holiday RSVP and the last flight confirmation, every Marin host walks into the guest bath and sees it the way a visitor will. The framed slider with the gray track. The curtain that never quite closes. At B & L Glass, we have been fitting glass into North Bay bathrooms since 1958, and a custom enclosure is usually what makes that room feel finished. Every one starts as a template of the actual opening, which turns an irregular wall or a sloped curb into a measurement instead of a problem. Panels are 3/8 or 1/2 inch tempered glass. Style follows the room. A frameless slider suits a tight alcove, and a hinged door can swing off a return panel. A neo-angle corner gives a small bath its floor back, while semi-frameless works if the budget would rather have a rail. Hardware is CRL and FHC, in polished chrome, brushed nickel, matte black, oil rubbed bronze, or brushed gold when the catalog has it. One more thing worth knowing: Marin Water's supply runs on the soft side, but spots and soap film still etch untreated glass, so ask about the optional water repelling coating at the measure.

Custom Bathroom Mirrors for Marin County Homes

A new shower has a way of exposing the mirror next to it. Usually that's a stock rectangle stopping a few inches shy of the sconces on both sides, floating in the middle of the wall like it wandered in. A custom mirror from B & L Glass gets cut to the span the vanity actually has, so it runs light to light. Pencil polished edges give the classic vanity look. Flat polish suits a clean, modern wall, and beveled suits a powder room in Ross or Kentfield that leans formal. Shape is open too (rectangle, oval, circle, arch, or freeform from a template). Low iron silvered glass gives truer color, which matters more than people think when this is the mirror everyone checks before dinner. Vanity mirrors go in safety backed as standard, with a bonded film that holds the glass together if it ever cracks.

Glass Vanity Tops Cut and Polished to Fit

Then there are the counters. Custom glass vanity tops from B & L Glass are cut to the footprint of the cabinet rather than whatever stock rectangle comes closest. Each top is finished with a pencil, flat, or beveled edge and tempered for daily use. A clear 1/4 inch cover over a marble vanity protects the stone without hiding any of it. Back painted glass is an easy way to bring color into the vanity, with a shade chosen to match the hardware finishes in your bath or kitchen. Sandblasted or etched glass covers privacy when a vanity calls for it. Same habit as the shower glass. Measure first, cut second.

Book a Measure With a San Rafael Glass Company This Season

Most custom shower and mirror projects run two to four weeks start to finish. Installing a single shower door usually takes a few hours on site. After that, the silicone needs about a day to cure before anyone steps in. So the math rewards an early start, especially with the holiday calendar filling up the way it does. Every install fromB & L Glass serving San Rafael and Marin County is done by our own glaziers, not subcontractors, whether the job is in Mill Valley, Larkspur, Tiburon, Corte Madera, or Novato. The work is licensed under CSLB 1058949, and our We Make It Right guarantee starts the day the crew finishes. Bring the bathroom photos, the rough dimensions, and the hardware finish you keep going back and forth on. Call or request a free quote today and we will measure the room you actually have.

B & L Glass
4040 Civic Center Drive
San Rafael, CA 94903
(628) 296-8084
blglass.com/san-rafael/