Introducing the PRO 2500 UTV Motorcycle Lift!

We speak with customers daily, and we hear suggestions regularly. Our customers all have different, unique needs. We wanted to act on their suggestions and develop a new product that would be all encompassing...and work for all vehicles, right up to the largest! So we designed a new lift table that works with motorcyles right up to utv’s, and even road and golf course equipment.

There was definitely a need for a lift table that raised higher, that was built wider, handled more weight, used hydraulics, and offered plenty of options to be able to service a wide variety of vehicles and at the same time be helpful in some industrial settings.

After much planning we have come up with the PRO 2500 high rise lift table. This monster lift is capable of lifting 2,500 lbs. Manufactured with heavy reinforcement in the main table, it will pick up and handle loads to its maximum with ease.

The heavy duty hydraulic cylinder allows for smooth operation both up to 48″ max height and down to the minimum 7 9/16″. Your choice of either an air unit or electric power pack, which power the hydraulics, is available.

The side extension kit consists of 4 equal sized panels (quarters) which are 15″ wide x 46″ long. They convert the main table to 60″ wide overall. This allows for lifting of various vehicles such as motorcycles, trikes, spyders, atv’s, utv’s, commercial mowers, and even paving and golf course equipment.

While lifting, you will be safe each step of the way. The safety locking plate at the base of the lift has 9 locking positions for any height requirement. They are approximately 22″, 27″, 31″, 34″, 37″, 39″, 41″, 43″ 46” to full height of 48″. Multiple stops for easy positioning for different jobs.

The solid base frame may be mounted into the floor if you want to have it level with your cement floor. You would lose a little height but have a nice level floor with 40″ of lift.

The ramps (one for the base lift and 2 more for side extension kit) are 40″ long. Many vehicles today are lower to the ground, which, in turn, requires use of the longer 40″ ramp - this ramp would eliminate bottoming during loading. Short ramps don’t do the job on all vehicles they often times cause bottoming while loading.

You can pick from an air powered pump for the hydraulics or an electric 110 volt motor and pump to power your lift. We also offer an optional rubber lined wheel vise.

We believe we have developed one table lift to cover a wide range of vehicles, maybe even some industrial applications at a very fair price.

The PRO 2500 High Rise lift carries a 5 year warranty on the structure and a 2 year warranty on the hydraulics.

In need of a 1750 lb capacity high rise air lift table? Check out our PRO 1750 lift here.

Need a 2,500lb capacity electric lift?

These PRO Series lifts feature free shipping and no sales tax.

Use the links above to check out these 2 new lifts, or call us at 603-234-2612. Visit us at 1298 Rte 3A in Bow, NH.