Federal Way, WA|Local Classified|Announcement|
Is a 20×20 Paver Driveway Expensive to Install in Federal Way? Insights From NW Landscape Management
Yes, a 20×20 paver driveway in Federal Way is relatively expensive compared to standard paving, typically running between $4,000 and $12,000, with most local homeowners landing around $8,000 for a professionally installed, vehicle-rated surface. Whether that is too much depends on what you expect from a driveway, and that is what this guide breaks down, based on what we see on real driveway paver installation Federal Way projects at NW Landscape Management.
Per square foot, pavers run roughly $10 to $30, a premium over poured concrete at about $8 to $12 and asphalt at about $3 to $7. If your only goal is the lowest price today, pavers will not win, but driveway paver installation is built to last for decades, which changes the long-term math.
The biggest swing in your invoice usually comes from the paver you choose. Concrete pavers run about $4,000 to $7,200, brick pavers $4,800 to $8,800, permeable pavers $6,000 to $10,000, and natural stone $8,000 to $14,000 or more. Every driveway is measured and quoted individually, so these numbers are ranges, not a quote. A driveway carries cars, pickups, and delivery trucks, so it needs a compacted aggregate base of at least 6 to 8 inches, often deeper in soft, wet soil. Skimping on that base can cause sagging and shifting within a few seasons.
Demolition of an old concrete or asphalt driveway adds $500 to $1,700, and permits usually add $50 to $300. Herringbone patterns, curved borders, and sloped grading add labor and material waste. Most residential projects take roughly one to two weeks, including tear-out, excavation, base work, and paving, though weather, size, and access can shift the schedule. Federal Way’s wet climate makes proper slope and drainage essential, so grading should move water away from the home and prevent pooling. Pavers add curb appeal, resist cracking, and let us replace individual pavers instead of tearing out the whole surface. For vehicle traffic, we recommend a 45- or 90-degree herringbone pattern because it locks pavers together in multiple directions and handles the turning forces of tires. Request a free estimate today. Single pavers can be replaced. Herringbone is the strongest pattern.
NW Landscape Management
1911 SW Campus Dr #464,
Federal Way, WA 98023
(253) 661-5824
https://share.google/eahcr8bDAqw7ysN8K
#DrivewayPaverInstallation #DrivewayPaverInstallationFederalWay #NWLandscapeManagement
