Custom Glass Wine Cellars Are Turning Up in Santa Rosa, CA Homes This Fall

Custom Glass Wine Cellars in Santa Rosa, CA, Where the Collection Stops Hiding in a Closet

October in Sonoma County is when the house starts getting ready for company, and the wine living in the closet under the stairs stops being a convincing arrangement. The glass wine cellars B & L Glass builds are exactly that: the glass. Frameless display walls, full height tempered insulated panels set into concealed channel mounts. Cellar doors as sealed dual pane units on pivot or hinge hardware, gasketed around the perimeter. Full height partitions. Single panel inserts coordinated with whatever the cabinetmaker is building. The cooling design belongs to a cellar HVAC specialist and the racking to the cabinetmaker, and B & L doesn't pretend otherwise. Low iron glass is the option to ask about. It loses the green cast standard glass carries, which matters when the labels are the thing on display. Six to ten weeks from approved estimate to finished install.

Full Height Glass Partitions That Divide a Room Without Darkening It

Drywall divides a room by darkening it. Glass divides a room and leaves the light where it was: still crossing from the window to the back wall, sightlines open, the house reading as one connected interior instead of a run of closed boxes. Glass partitions in Santa Rosa come fixed or sliding, framed or frameless: panel runs in tempered or laminated tempered glass, both meeting ANSI Z97.1, top track barn style and pocket configurations for a room that needs to open back up on demand, and frameless panels set into concealed channels that do the structural work out of sight. On sound, a single pane partition lands around 25 to 30 STC, which covers conversational privacy, while a dual pane laminated build with gasketed framing gets to roughly 40 and up. It takes the edge off the conversation on the other side. It will not make the room silent. Worth saying out loud before anyone expects a recording studio.

Custom Glass Tabletops Cut in the Santa Rosa Shop Before the Table Fills Up

Hosting season has a way of drawing attention to the dining table. Usually the chip in the corner, or the stock top that overhangs the base by an inch and has bothered somebody for two years. B & L cuts, edges and finishes tops in its own Santa Rosa shop: dining replacements, round and oval surfaces, coffee and end tables in shapes nobody stocks, desk and vanity tops, clear covers laid over wood or marble, and the glass that goes back into a china cabinet or an antique writing desk. Custom glass tabletops in Santa Rosa run three eighths of an inch for most stand alone tops, half an inch for large or unsupported spans, a quarter inch for protective covers. Pencil polish is the default edge. Flat polish reads modern, a bevel reads traditional. Tempered wherever people sit, eat or work. Two to four weeks, typically.

Request a Santa Rosa Glass Estimate Before the Hosting Calendar Fills

The scheduling is the part worth thinking through now. A tabletop is two to four weeks. A partition is three to five weeks once the opening is templated. A wine cellar is six to ten weeks, which puts an October start on the comfortable side of New Year and a December start somewhere else entirely.B & L Glass in Santa Rosa has been family owned since 1958, under CSLB license 1058949, and the same crews carry the work out to Healdsburg, Windsor, Sebastopol, Petaluma and Sonoma. Financing is available if spreading a project out makes it easier to start. Call 707-210-0457 and somebody comes to template the actual opening, because a cellar door cut off a phone photo fits nothing. Bring the bottle count you keep underestimating. Bring the table you've been meaning to deal with since spring.

B & L Glass
3175 Cleveland Ave
Santa Rosa, CA 95403
707-210-0457
blglass.com